View source for HANcoder/STM32/Blocks/Store Error
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Store Error.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Store Error.
Supported Targets: Olimexino, E407, P405
When this block is triggerd, an error wil be stored to RAM. If the error is already present in RAM, its occurrence counter will be incremented and the time stamp will be updated. If the error occurs for the first time (and only then) since startup (and therefor is not present in the RAM) it will also be stored in EEPROM.
Trigger input: The block will be executed when the value of this signal changes from 0 to 1, the error will be stored.
Input 1(optional): Error code (ID) of the error to be stored.(uint16)
Input 2(optional): Error parameter of the error to be stored.(uint8)
Parameter | Description |
---|---|
Use inports | Instead of using a fixed error code and error parameter (see below), it is possible to use input port to the block to specify the error code and error parameter. |
Error code | The error code (ID) that needs to be stored when this block is triggered can be specified . |
Error parameter | The error parameter of the error that needs to be stored when this block is triggered can be specified. |
Delete error | Clear errors | Read active error | Read stored error | Search active error | Search stored error | Store error | Total Errors