Testing the project

From OpenMBD
Revision as of 20:03, 28 February 2019 by Hugo (talk | contribs)
Jump to: navigation, search

Finally, the new block can be tested.

  • Create a Simulink model that provides inputs for the twelve input ports, such as depicted below:

Example usage.PNG

  • Build the model
  • The Diagnostic Viewer indicates that the build process completed successfully. If not all errors must be resolved first.
  • Test the generated application by programming the Olimexino STM32 board with the signal tower connected to 5V, GND, and D11 (if SPI1 was selected) or D34 (if SPI2 was selected).

Part 4: Updating the build environment - Previous