ThrottleBodyHardware

From OpenMBD
< HANcoder‎ | Training Material‎ | ThrottleValveController
Revision as of 16:08, 25 January 2018 by Jason (talk | contribs) (Created page with "{{HANcoder}} ==Building a throttle valve setup== This page explains how to build a throttle valve setup for the throttle valve workshop. Creating HANcoder/Examples/Throttle...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Building a throttle valve setup

This page explains how to build a throttle valve setup for the throttle valve workshop. Creating HANcoder/Examples/ThrottleValveController

First a frame is needed to house all the parts, for this two acrylic plates are used. The plates are 4mm thick and are cut with a lasercutter.

ThrottleValveControllerAcrylicPlates.jpeg

The files needed for the lasercutter can be found below:

File:Throttleplate.DXF or File:Throttleplate.SLDPRT

File:Throttleplatebackplate.DXF or File:Throttleplatebackplate.SLDPRT


To drive the electric motor in the throttle body is driven with a BTS7960 and the Olimexino is connected with a arduino proto shield and a sensor shield. See the schematics below:

ThrottleValveControllerSchematics.png