View source for HANcoder/STM32/Blocks/Delete Error
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Delete Error.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Templates used on this page:
Return to HANcoder/STM32/Blocks/Delete Error.
Supported Targets: Olimexino, E407, P405
When this block is triggered, the specified error is deleted from the RAM of the controller. The error code (ID) combined with the parameter makes the error unique.
Parameter | Description |
---|---|
Use inports | Instead of using a fixed error code and error parameter (see below), it is possible to use input port to the block to specify the error code and eror parameter. |
Error code | The error code (ID) that needs to be deleted when this block is triggered can be specified . |
Error parameter | The error parameter of the error that needs to be deleted when this block is triggered can be specified. |