Home
Back to Home
Welcome to the ISO26262: Recommended Practice. This is the result of a project which is set up by HAN-Automotive Research, in cooperation with Baesis, BRACE, VSE and e-Traction.
At this moment the Concept phase and the Development phase at system level are covered.
This project is made possible by our parters who actively contributed: - Baesis, Functional Safety Expert - BRACE, Functional Safety Expert - VSE, implementing ISO26262 - e-Traction, implementing ISO26262
The purpose of this project is to lower the investment in both time and cost needed to introducte ISO26262 into small and medium sized companies (SME's). In order to reach this goal informed decisions made by our project partners are documented, together with their rationale, to enhance decision making in future projects. Particular challenges in the implementation process of ISO26262 are addressed and the solutions will be explained. Also templates are made to aid in the process of new document creation to save both time and money. These templates are provided with hints and examples. In addition to this two real-life use cases are added to each milestone: the VSE use-case and the e-Traction use-case.
This wiki is set up according to the same structure as the V-Cycle which is also referred to in the ISO26262. (picture below)
Management of Functional Safety
ISO26262/V-Cycle/2_Management_of_Functional_Safety
ISO26262/V-Cycle/2-5_Overall_Safety_Management
ISO26262/V-Cycle/2-6_Safety_Management_during_the_concept_phase_and_product_development
ISO26262/V-Cycle/2-7_Safety_management_after_the_item's_release_for_production
Concept Phase
ISO26262/V-Cycle/3._Concept_Phase
ISO26262/V-Cycle/3-5_Item_Definition
ISO26262/V-Cycle/3-6_Initiation_of_the_Safety_Lifecycle
ISO26262/V-Cycle/3-7_Hazard_Analysis_and_Risk_Assessment
ISO26262/V-Cycle/3-8_Functional_Safety_Concept
Product Development at the System Level
ISO26262/V-Cycle/4._Product_development_at_the_system_level
ISO26262/V-Cycle/4-10_Functional_Safety_Assessment
ISO26262/V-Cycle/4-11_Release_for_Production
ISO26262/V-Cycle/4-5_Initiation_of_Product_Development_at_System_Level
ISO26262/V-Cycle/4-6_Specification_of_the_technical_safety_requirements
ISO26262/V-Cycle/4-7_System_Design
ISO26262/V-Cycle/4-8_Item_Integration_and_Testing
ISO26262/V-Cycle/4-9_Safety_Validation
Product development at the hardware level
ISO26262/V-Cycle/5._Product_development_at_the_hardware_level
ISO26262/V-Cycle/5-10_Hardware_Integration_and_Testing
ISO26262/V-Cycle/5-5_Initiation_of_Product_Development_at_the_Hardware_Level
ISO26262/V-Cycle/5-6_Specification_of_Hardware_Safety_Requirements
ISO26262/V-Cycle/5-7_Hardware_Design
ISO26262/V-Cycle/5-8_Evaluation_of_the_Hardware_Architectural_Metrics
ISO26262/V-Cycle/5-9_Evaluation_of_the_Safety_Goal_violations_due_to_Random_Hardware_Failure
Product development at the software level
ISO26262/V-Cycle/6._Product_development_at_the_software_level
Miscelaneous