Difference between revisions of "HANcoder/Training Material/ThrottleValveController/ThrottleBodyHardware"
From OpenMBD
(Created page with "{{HANcoder}} ==Building a throttle valve setup== This page explains how to build a throttle valve setup for the throttle valve workshop. Creating HANcoder/Examples/Throttle...") |
(No difference)
|
Revision as of 16:08, 25 January 2018
Building a throttle valve setup
This page explains how to build a throttle valve setup for the throttle valve workshop. Creating HANcoder/Examples/ThrottleValveController
First a frame is needed to house all the parts, for this two acrylic plates are used. The plates are 4mm thick and are cut with a lasercutter.
The files needed for the lasercutter can be found below:
File:Throttleplate.DXF or File:Throttleplate.SLDPRT
File:Throttleplatebackplate.DXF or File:Throttleplatebackplate.SLDPRT
To drive the electric motor in the throttle body is driven with a BTS7960 and the Olimexino is connected with a arduino proto shield and a sensor shield. See the schematics below: