View source for HANcoder/Training Material
You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
Template used on this page:
Return to HANcoder/Training Material.
You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
You can view and copy the source of this page.
Template used on this page:
Return to HANcoder/Training Material.
On this page some examples have been added. Most of the examples are either real project or are part of project done with HANcoder. Each example has been documented in a way that a new user is able to build the same functionality from scratch. However it is not necessary to rebuild the example because the finished model, srec (executable file for on the microcontroller) and a2l (file for HANtune) are all provided. It is strongly encouraged to contact Jason.vanKolfschoten@han.nl if you wish to contribute to this page with an example of your own.
Next to the user projects there are also some basic examples which just show how certain blocks can be used.
Projects that have been used in the past by users of HANcoder
The vehicle logger saves the position, speed, acceleration, angular rotation and engine information of a car to an SDcard. It consists out of several subsystems which have been described in different pages on this wiki:
This communication model is part of a larger model where a remote controlled vehicle is controlled using ZigBee modules and an E407
These examples are just an illustration of the capabilities of the HANcoder blocks, they do not originate from real projects. For an overview of all blocks check the Block overview page.
A basic workshop has been developed to show the basic functionality of both HANcoder as HANtune.
A more advanced workshop shows the users how to use Simulation with Model Referencing and Variants to get the most out of Model Based Development.