Analog Input
From OpenMBD
< HANcoder | STM32 | Blocks
Revision as of 11:03, 5 April 2017 by Jasonvankolfschoten (talk | contribs)
Supported Targets: Olimexino, E407, P405
General information about Analog Input
This blocks reads the analog value of the selected pin. The output of the block is the bit value of the conversion. When using the standard Vref of 3.3V the result of the conversion must be multiplied by 0.8mV to get the actual voltage on the pin. (The E407 has an option to enable filtering)
Block
Mask
